SQUEEGEE 3/16 x 3/4 x 140  PT-22 DDB-S  80 DUROMETER  45 DEGREE
Spotlight!
Price: $72.22

    Quantity:
    Item #: CAT-29223-80
    Availability: Call for Availability

    SIZE: 3/16" thick x 3/4" wide x 140" long

    SHORE A HARDNESS: 80 durometer            COLOR CODE:  Blue

    PT-22 (Plei-Tech® 22): Recommend for use with Plastisol, water base and less aggressive UV and solvent based inks. Color coded according to hardness.

    BEVEL:  DDB-S  Double Double Bevel – Single Durometer   Two print edges provides more control for printing on a wide variety of cylindrical substrates.  Also helps to extend the life of the squeegee.  Suggested for use with Container/Bottle applications.

    ANGLE:  45.0 ͦ  Double Bevel   Minimal dimensional stability because of thin printing tip.  Best suited for printing with less aggressive inks and solvents, with lower squeegee pressure on irregular substrates.

    ADDITIONAL INFORMATION:

    • Squeegees should be stored flat, in a dry (50% relative humidity) room with a temperature range from 65 ͦ -75 ͦ F. Under these storage conditions, squeegee shelf life is approximately one year.
    • Production time should be monitored and rotation of squeegees should be done frequently. Frequency would be dependent on the ink/solvent being used. The use of aggressive UV and solvent based inks, will require the squeegee to be changed more often. This will allow a more uniform print quality and increase the life of the squeegee.
    • After removal from the press, a squeegee should be wiped clean and stored in a dry area at room temperatures.
    • Allow a rest period of 24 hours, to recover from contact with chemicals, before the squeegee is put to use again or re-sharpened and put back in to production.
    • If you don’t see what you are looking for, or have additional questions, please feel free to contact us.